+86 13065613316
Jun 02, 2021
There are many accessories for the installation of plastic wood flooring, and there are many materials for the accessories. You need to understand the characteristics of each accessory, and then install it in combination with the performance of the plastic wood flooring!

Plastic wood engineering construction methods and precautions for floor installation:

1. Before installing plastic wood floor

a. From the professional point of view of installing the floor, before starting the installation work, it is necessary to keep the plastic wood floor in a dry, flat and clean state, so as to better ensure the smooth progress of the subsequent installation work.

b. Prepare installation tools, electric drills, ordinary woodworking tools, labor protection gloves, stainless steel screws, etc., among which electric drills are necessary tools for installing plastic wood floors. Plastic wood flooring is more brittle. When fixing the floor and the keel, you must use electric drills to guide holes, and then install screws to fix it to avoid damage to the plastic wood flooring.

2. During the installation of plastic wood flooring

a, fixed plastic wood keel
Spread the plastic-wood keels evenly on the cement floor. It is recommended that the spacing between each keel should not exceed 35cm. Use an electric drill to guide the holes on the keel, and then screw the screws into the drilled holes, and fix the keel on the cement ground. The nail heads should be screwed into the keel, not exposed, otherwise it may cause uneven floor layout.

b. Fix the first plastic wood floor
There are yin and yang grooves on the left and right sides of each plastic wood floor. When paving the first floor, you can use woodworking tools to saw off or grind off the male grooves on the outside of the first floor, and then use an electric drill to guide holes on the surface of the floor, screw in the nails, and fix it on the keel. .

c. Fix the second plastic wood floor
Clamp the male groove of the second plastic wood floor to the female groove of the first floor, and then drill the pilot hole on the side surface of the male groove of the second floor, screw in the screw to fix it on the keel, the screw spacing can be The installation process is controlled by the construction personnel themselves, and it does not need to be too dense, just ensure that it is firm. The installation of the plastic wood floor at the back is the same as before, so there is no need for more explanation.



YIDA WPC is a leading wood-plastic composite material factory in Ningbo, China. We have more than 10 years of production experience in manufacturing outdoor floors, outdoor tables and chairs, indoor and outdoor wall panels, stair panels, ceilings, fences, railings, garden handrails, garden pavilionsflower boxes, flower stands, etc. The product has the advantages of waterproof, anti-corrosion, moisture-proof, insect-proof, maintenance-free, green, recyclable, and easy to install. It is widely used in various fields such as building materials, decoration materials, packaging and transportation.